What is Mark 1 (Mycroft Kickstarter)

Mycroft Mark 1 at your service. I’m a little table robot hoping to become your first robot buddy. I’m ready to help you out with anything I can. I may be young, but I’m also full of ambition. Since I’m always connected to internet, I’m learning new things virtually every week.

Hardware Information

The Mark 1 is based off of a Raspberry Pi, the full hardware specs are below. For more information on the schematics you can find those at https://github.com/MycroftAI/hardware-mycroft-mark-1

Mark 1 Specs:

  • Raspberry Pi 3
  • built-in speaker
  • RCA audio ouput ports
  • 8x32 LED display
  • dual NeoPixel "eyes"
  • built-in WiFi (802.11B/G/N)
  • 10/100 Ethernet port
  • HDMI debug port
  • 4 USB ports
  • 40 pin GPIO connector
  • integrated Arduino Mini
  • enclosure with side-mount ports
  • 12 Volt power adapter.
  • NOTE: The 40-pin connector has a different pinout than a Raspberry Pi. The Pi's built-in Bluetooth is also disabled.

Latest Mark 1 Image

The most recent image can always be found here